You can launch the System Configuration utility using the built-in search in the taskbar. Just enter a request and click on the very top row in the search results. In the window that appears, go to the "Download" tab and check the "Minimal" item. Confirm your choice by pressing the "OK" button. You will see a dialog box asking if you want to restart your computer right now. After your consent, the operating room Windows system 10 will boot into safe mode.
Method 2: Command Line
Experienced users should remember that you can boot the system in safe mode by holding the F8 key when starting the computer. However, in Windows 10 this feature has been disabled to speed up system startup. To fix this "improvement", you need to enter only one command at the command line.
- Right-click Start on the taskbar and select Command Prompt (Admin) from the menu that appears.
- Enter the following command in a command prompt window: bcdedit /set (default) bootmenupolicy legacy
- Press Enter. Close the terminal window and restart your computer. Now when you press the F8 key during system startup, the boot method selection dialog should reappear.
If in the future you want to return everything as it was, then this can be done using the following command:
bcdedit /set (default) bootmenupolicy standard
Method 3: Custom Boot Options
This method does not require any tricks from you and seems to lie on the surface. However, how many can boast that in the wilds Windows settings 10 independently discovered this useful feature? Therefore, I decided to include this download method in the article too.
So, open the "Start" menu, click on the "Settings" link, and then follow the address: "Update and security" → "Recovery" → "Special boot options". Click the "Restart Now" button. This will take you to the Select Action screen. It offers three options, of which we are interested in the "Diagnostics" item.
On the next screen, click the "Advanced Options" button, and then "Boot Options". At the end of this long path, we are waiting for the desired option called "Enable safe mode." By the way, you can significantly shorten this journey if you simply hold down the Shift button while clicking on the Shut Down command in the Start menu.
Read how to download secure windows mode . Consider the standard methods, using the recovery disk or using a specific keyboard shortcut. If the operating system does not boot or does not work correctly for one of the many possible causes, then sometimes the only way to restore its functionality and gain access to your data is to boot the computer in Safe Mode and fix errors with it.
Windows 10 Safe Mode
If you have been using Windows 10 for some time, then you probably noticed that the old ways to boot a computer into safe mode no longer work. Those. pressing the F8 or Shift+F8 keys during system boot will no longer be able to boot the operating system in safe mode. But that doesn't mean there's no more to Windows 10 safe mode. Just to download it, you need to go through other procedures. Let's look at them in more detail.
When you enter Windows 10 Safe Mode, the operating system loads a minimal interface and only the essential services and drivers that are necessary for the system to function.
Method 1: Using the System Configuration tool (msconfig.exe)
The easiest way to download Safe Mode Windows 10, this is using the . Many users know it by its executable name: msconfig.exe.
To run this tool, you need to open a window "Run"(combination Windows keys+ R) and enter in it msconfig.
Also, System configuration can be launched using the search box next to the menu button Start. It is enough to enter in it.
In the tool window that opens, go to the tab Downloads, and in the section select Safe mode.
After that, the system will prompt you to restart the computer for the changes to take effect. You can continue working on the computer without restarting, or restart it, after which it will automatically boot into safe mode.
Method 2: Restart your computer by pressing the Shift key (Shift + Restart)
Another way to run Safe mode Windows 10 is to restart the computer while holding down the Shift key. To do this, open the menu Start, press the button Shutdown and holding down the Shift key, select .
Also, this combination can be used from the lock screen.
/ Extra options.
In the window Additional options select
Windows 10 will notify the user that the system can be restarted to run additional options, one of which is Safe mode. Click the button Reload.
After the system reboots, select with what parameters you want to boot the system. To boot the system into safe mode there are three options (F4 - F6).
Method 3: Boot using the recovery drive
Windows 10 has a tool to create recovery discs.
Boot Windows 10 using the recovery disk created in this way. After that, the system will prompt you to select a keyboard layout, then select the menu Troubleshooting / Extra options. Further actions are the same as those described in the previous section.
Method 4: Custom Boot Options
Although there are several ways Windows boot 10 in safe mode, this method will be the most correct - provided that the operating system you need to load in safe mode fully functional.
It's pretty easy to do this:
- open Options
- Go to Update and Security / Recovery
- In chapter Special download options press a key Reload Now
- After e that Windows 10 will reboot and prompt you to select one of the menu items. Select Troubleshooting / Extra options.
- Next, follow the steps that are described in Method 2
The described methods of loading the operating system in safe mode relevant for both Windows 10 and Windows 8.1. Starting from data Windows versions Safe mode ceased to be a function that only IT specialists use in their work. Now this is just another one of the functions of the operating system, which is available to every user, and with the help of which the user can effortlessly
Safe mode - mode Windows work, at which the minimum number of services and applications are running. This mode is usually used when there are problems with normal operation, for example, due to virus infection or incorrect operation of drivers or programs. In this article, I will show you several ways how to downloadWindows 10 in safe mode.
4 ways to get into Windows 10 Safe Mode:
Entering safe mode through "System Configuration".
For this method, you must press the key combination "Win" + "R", in the Run line that opens, enter the command msconfig and press Enter.
In the "System Configuration" window, open the "Boot" menu and check the "Safe Mode" box. Click the "OK" button.
In the window that appears, click "Restart".
After rebooting, your computer / laptop will boot into safe mode.
To return to normal mode, follow a similar procedure, with the only difference - uncheck "Safe Mode".
Booting into Windows 10 Safe Mode by holding down the "Shift" key.
To use this method, you must click the "Start" button, select "Shut down", hold down the "Shift" key and click the "Restart" button.
The computer / laptop will restart and a window will open prompting you to select an action, select "Diagnostics".
After that select "Advanced Options".
Then select "Download Options"
Click the "Reload" button.
The computer/laptop will reboot and offer you several boot modes, you need to press the "F4" key to select safe mode.
This way you will boot into safe mode.
Boot Windows 10 in Safe Mode Using Command Prompt .
For this method open command line on behalf of the administrator, to do this, right-click on the Start button and select "Command Prompt (Admin)".
In the command prompt window that opens, enter the command bcdedit /set (default) bootmenupolicy legacy and press Enter.
After that, restart your computer / laptop and press the F8 key while it boots. As a result, you will see a menu in which you must select "Safe Mode".
Now you can always boot into Windows 10 Safe Mode by pressing the F8 key when the operating system boots.
Get into safe mode using the emergency shutdown of the computer / laptop.
I want to note right away that this method is not in vain the latest, since it is not very safe and should be used only in extreme cases.
The essence of this method is simple, you need to turn off the computer / laptop using the power button. To do this, press and hold the power button for a few seconds. Your computer/laptop will turn off. The next time you turn it on, the Recovery window will appear, click "Advanced recovery options".
After that, you must follow the steps described in the second method.
Safe mode is needed to diagnose the state of the system, fix errors, remove viruses, and other useful actions. However, to take advantage of Safe Mode on a laptop, you need to know how to enter it. There are no fundamental differences between running Safe Mode on a desktop computer and a laptop, but you can highlight a few features, which we will do.
Using the F8 Key
If you have Windows XP or Windows 7 installed, follow these steps to enter Safe Mode on your laptop:
You will be notified that you are in safe mode. The interface will be slightly changed, all graphic effects are turned off, some drivers stop working, but otherwise the system should work correctly.
Safe Mode on Windows 8.1 and Windows 10
Unfortunately, a convenient way using the F8 key ceased to work with the release of Windows 8 and subsequent OS versions from Microsoft. Now, instead of one F8 key, you have to press the Shift + F8 combination:
If this method does not work, then you can use installation media with a Windows distribution. Open the "System Restore" section, launch the command line and write the query " bcdedit /set (current) safeboot minimal". After the restart, safe mode will boot. 
On Windows 10, there is another option to start Safe Mode:
- You need to open "Settings"
- Go to the "Update and Security" section and open the "Recovery" subsection
- In the right window there is a field "Special options", where you need to click "Restart"
- after which the “Boot Options” screen will appear again, where the control is performed by the F1-F9 keys.
Change the system configuration
In order not to get confused alternative ways launching safe mode, we recommend using the universal method, which involves making changes to the boot through the System Configuration menu.
The main disadvantage of this method is that you will have to open System Configuration again and change the boot mode. In addition, Windows must be healthy so that you can boot normally and make the necessary changes. Otherwise, there are no problems - after the reboot, the Safe Mode diagnostic mode will start, where you can complete the tasks.
Many problems such as cleaning the PC from malware software, fixing errors after installing drivers, starting system recovery, resetting passwords and activating accounts, are solved using safe mode.
Safe Mode or Safe Mode is a special diagnostic mode in Windows 10 and others. operating systems, at which you can start the system without including drivers, unnecessary Windows components. It is used, as a rule, for troubleshooting and troubleshooting. Consider how you can get into Safe Mode in Windows 10.
Method 1: System Configuration Utility
The most popular way to enter Safe Mode in Windows 10 is to use the Configuration Utility, a standard system tool. Below are the steps you need to go through in order to enter Safe Mode in this way.
Method 2: Boot Options
You can also enter Safe Mode from a booted system through the boot options.
Method 3: command line
Many users are used to the fact that you can enter Safe Mode when you reboot, if you hold down the F8 key. But, by default, in Windows 10, this feature is not available, as it slows down the system startup. You can fix this effect and turn on the figurative start of safe mode by pressing F8 using the command line.
Method 4: Installation media
In the event that your system does not boot at all, then you can use the installation flash drive or disk. The procedure for entering safe mode in this way looks like this.
- Boot the system from the previously created installation media.
- Press key combination "Shift+F10", which launches the command line.
- Enter the following line (command) to start safe mode with a minimum set of components
bcdedit /set (default) safeboot minimal
or string
bcdedit /set (default) safeboot network
to start with network support.
In these ways, you can enter Safe Mode in Windows 10 and diagnose your PC with standard system tools.
